BDI format Assembly Instructions Download Page 5

Page: 5 / 5

a s s e m b l y i n s t r u c t i o n s

bdi

usa.com [email protected]

format

6301

DESK

Step 7

Attach

Pulls (K) using Screw (M).

With the grippy side facing down, insert

Center Drawer Liner (P)

into the center drawer and

Side Drawer Liner (Q)

into both side drawers.

Place Format Desk in desired location. Once all of

the electrical wires are routed, install

Front Kick Panel (N)

as shown below.

The rear side of panel has magnets that will hold the panel in place

Note:

The Format Desk is designed to permit placement in front of an electrical
outlet for easier wiring access.

K x 2

M x 4

P x 1

Q x 2

Summary of Contents for format

Page 2: ...merservice bdiusa com format 6301 DESK Step 2 Install Glides C to the bottom of Left Leg D and Right Leg E Step 3 Attach Upper Horizontal Beam F and Lower Horizontal Beam G to inside of Right Leg E using Screw H and 4mm Hex Wrench B C x 4 E F G E D H x 2 H x 2 ...

Page 3: ...ontal Beam F and Lower Horizontal Beam G using Screw H and 4mm Hex Wrench B Step 5 With the help of another person gently lower Leg Assembly onto Drawer Assembly I Fasten into place using Screw H and 4mm Hex Wrench B at all 6 fastener locations DO NOT OVERTIGHTEN After fastening carefully flip desk onto legs D 2 Person Task G F H x 2 H x 2 H x 6 ...