BDI DUO 6241 Quick Start Manual Download Page 4

Page: 4 / 6

bdiusa.com

DUO

6241

PEDESTAL DESK

Step 6 - Wire Management (Optional)

Your Duo Pedestal Desk has 2 concealed areas inside the back of the cabinet where a surge protector may be

placed.

Cord pass through hole

Surge Protector

(not included)

Step 7 - Back Panel Installation

Install the

back panel C5

by inserting the top edge into the upper groove, and inserting bottom edge into the

lower groove. Power cords may be routed through the mouse holes on the top and bottom edge of

back panel

Wire pass-through holes

Summary of Contents for DUO 6241

Page 2: ...ot C2 to the bottom of leg A1 using screws H2 x2 and hex wrench T1 Step 3 Attach Leg Carefully position the desk assembly A2 upside down Remove the flat panel but keep the 6 screws for steps 4 5 Attach leg A1 into recessed square area using screws H3 x4 and hex wrench A1 C1 C2 A2 A1 T1 H3 x 4 H1 x 4 H2 x 2 Remove this panel and keep the 6 screws for following steps ...

Page 4: ...net where a surge protector may be placed Cord pass through hole Surge Protector not included Step 7 Back Panel Installation Install the back panel C5 by inserting the top edge into the upper groove and inserting bottom edge into the lower groove Power cords may be routed through the mouse holes on the top and bottom edge of back panel 1 2 Wire pass through holes C5 ...

Page 5: ...AL DESK 5 Step 8 Glass Top Installation With the help of another person carefully lower glass top C6 onto the desk assembly Step 9 Attach Drawer Pulls Open each drawer and install the drawer pulls C7 x3 using screws H5 x6 and a Phillips Screwdriver C7 H5 ...

Page 6: ...r File For letter files facing sideways attach file bar clip C8 to both ends of small file bar C9 as shown Place the file bar assembly in the notches located on the left and right drawer side panels For front facing letter files skip this step altogether Step 11 Legal File Accommodation C8 C9 H5 C7 ...