manualshive.com logo in svg

BDI CORRIDOR SV 7128, Quick Start Manual

Share
Download
BDI CORRIDOR SV 7128 Quick Start Manual Download Page 3

bdiusa.com

[email protected]

CORRIDOR 

7128

CONSOLE

3

Step 5 - 

Place 

glass top C5

 on top of the cabinet. Position glass flush with cabinet front doors.  

  

2 Person  Task

Step 4 - 

With help from another person, carefully position the cabinet upright and install 

Door Pulls H5 

using 

Screws H3 

and 

Screwdriver T1

. Adhere 

Rubber Bumpers H4

 about 1 inch (25mm) from edges of the cabi-

net as shown below.

  

2 Person  Task

H5

H5

H4

H4

H4

H4

H4

H4

H3

H3

C5

Summary of Contents for CORRIDOR SV 7128

Page 1: ... below The assembly workspace should be a non marring surface such as carpet For missing hardware pieces contact BDI Customer Service at customerservice bdiusa com For all other concerns please contact your BDI retailer Designed by Matthew Weatherly These distinctive product configurations are protected by US and international patents trade dress and or copyright laws Corridor BDI are trademarks o...

Page 2: ... blocking above the shelves Attach the base to the cabinet with 6 Screws H2 using Hex Wrench T2 Do NOT fully tighten until all screws are started T2 2 Person Task H2 x 6 Step 2 Attach the 2 Leg frames A3 to Sub frame A2 with 8 Screws H1 using Hex wrench T2 Make sure the red arrow on the sub frame faces the same direction as the direction of the leg frames H1 Screw x 8 A2 T2 H1 Red T2 A3 A2 ...

Page 3: ... glass flush with cabinet front doors 2 Person Task Step 4 With help from another person carefully position the cabinet upright and install Door Pulls H5 using Screws H3 and Screwdriver T1 Adhere Rubber Bumpers H4 about 1 inch 25mm from edges of the cabi net as shown below 2 Person Task H5 H5 H4 H4 H4 H4 H4 H4 H3 H3 C5 ...

Page 4: ...o attain a level stable cabinet placement Turning the leveler clockwise will extend the leveler turning it counter clockwise will retract it CORRECT Door is sitting squarely and evenly spaced on tops and sides INCORRECT Door is out of alignment with the rest of the unit STEP 2 Adjust Door Hinges if needed The doors on your cabinet should be evenly spaced and the doors should open and close freely ...

Reviews:

No comments

Brands by name

Popular brands

Load more brands