1
Ciao is engineered for easy assembly. Carefully follow this
procedure to prevent any damage.
Placement and Maintenance
Ciao is designed for indoor use on level floors. Clean wood veneer
with a moist cloth.
Step 1
Unpack and identify the components at left. The assembly
workspace should be a non-marring surface such as carpet. For
missing hardware pieces, please contact BDI Customer Service
at [email protected]. For all other concerns, please
contact your BDI Retailer.
Component List
Designed by Matthew Weatherly.
These distinctive product configurations are protected by US and
international patents, trade dress, and/or copyright laws.
BDI are trademarks of Becker Designed, Inc.
All Rights reserved. ©2015, BDI
Made in China. 1170REV10202015v1
A - Phillips Screwdriver
x 1
ciao
1170
console
a s s e m b l y i n s t r u c t i o n s
bdi
usa.com [email protected]
C - Toggle Bolt package
x 1 Package
(2 toggles and screws
with each package)
D - Dry wall anchor
x 2
E - Wall Cleat
x 1
I - Screw
x 2
F - Screw
x 4
J - Washer
x 4
B - Wall Template
x 1
G - Leg
x 1
K - Composite Glass Top
x 1
H - Console
x 1
Step 2
Position the
Wall Template (B) in the desired console
location. Using a pencil, mark the wall as shown in
the diagram above, tracing the two slot locations near
top of template and the left & right hole locations near
bottom. Mark a hole location at center of each traced
slot.
