S2518PB Hardware Installation Manual
- 1 -
Chapter 1
S2518PB Switch Overview
The document describes the characteristics and parameters of S2518PB and gives an
overview of S2518PB.
1.1 Standard Configuration
S2518PB switch has three parts: 16 IEEE802.3af/at gigabit Ethernet Base-T ports, 2
gigabit Ethernet SFP ports and 1 Console port. See the following table:
Table 1- 1 Attributes of necessary ports
Ports
Features
Gigabit PoE ports
Base-T port: a rate of 10/100/1000M
auto-adaptation,
cable
MDI/MDIX
auto-identification, UTP(RJ45) port
Gigabit Ethernet optical ports
Optical port: 100/1000M SFP port, with LINK/
ACT indicators
Console port
A rate of 9600bps, RJ45 interface
Figure 1- 1 Front template of the S2518PB switch
Table 1- 2 Parts at the front template of the S2518PB switch
No.
Abbrev.
Name
Remarks
1
Console
Console port
Manages the switch locally.
2
SYS
System indicator
If the indicator is always on, the system is
started up.
If the indicator flickers, the system works
normally.
