BD FocalPoint GS User Manual Download Page 107

Page: 107 / 242

The BD FocalPoint™ Slide Profiler Main Window

107

Month

— Displays statistics for a current month and year. To specify a different date, select

the

Edit

button in the appropriate field (month or year) and use the arrow buttons to select

the desired date.

Choose

Print Preview

. The system searches the FocalPoint™ database for SI results which

are displayed as shown in Figure 11

12.

To print the report, choose the

Print

command; to return to the Statistic Integrity Reports

window, choose

Back

Choose

Back

again to return to the Statistic Reports window; click on the question mark to

view the Help screen.

Figure 11

12 – Example of system integrity statistics (monthly)

11.2.3

System Messages

Occasionally, for troubleshooting purposes, Technical Support may ask to view the current

system messages.

Summary of Contents for FocalPoint GS



















































































































































































































































Search results

Summary of Contents for FocalPoint GS

Reviews:

BD FocalPoint GS, User Manual, Page: 107 / 242

Search results

Summary of Contents for FocalPoint GS

Reviews: