Impedance switching:
All of our amps come with some type of impedance switching mechanism to help you match
the output impedance of the amp to the impedance of the cabinet(s) you are using.
Typically, we will use 2, 4, 8 and 16 outputs or a combination thereof coupled with 2 parallel
output plugs for multiple speaker cabinets.
WARNING!: DO NOT MISMATCH THE SPEAKER OUTPUT OF YOUR AMP TO THE CABINET.
CATASTROPHIC FAILURE COULD RESULT AND WILL VOID YOUR WARRANTY. DO YOUR
BEST UNDER EVERY CIRCUMSTANCE TO MATCH IMPEDANCES OF AMP AND CABINET.
Effects Loop:
The effects loop is unique in that it hooks up directly to the phase inverter from the last stage of
the preamp. This arrangement allows you to either blend in the effects from the loop or blend
them out for a completely clean signal. The blend control can be substituted for a level control
by customer request.
