6
|
PRODUCT ASSEMBLY
BEFORE FIRST USE
1
Place the part A upper crossbar on the
part B lower crossbar.
2
Attach the part D rotating base to the part
A & B crossbars with four part 1 screws
and four part 2 washers.
3
Attach the part C support shaft to the part D rotating base with four part 1 screws and four part 2
washers. Slide the part E gear cover down the support shaft onto the rotating base, make sure the
pedal is free to articulate.
1. Hold the umbrella upside down and shake gently to separate the umbrella ribs. If necessary, carefully
pull the ribs apart to free them.
2. Slowly turn the crank to open the umbrella. Make sure that the ribs are not stuck together.
A
B
C
E
2
2
1
x4
x4
x4
x4
1
D
