8
|
PAIRING REMOTE
TV
LOUNGE
ZG
M1
10
MIN
TIMER/
ALL OFF
20
MIN
H
E
A
D
F
O
O
T
M2
FLAT
HEAD
FOOT
MODE
1.
Press and hold the adjust head up and adjust foot up buttons.
2.
Press and hold the pairing button underneath the bed.
-
Pairing button is on the wire attached to the power supply
3.
Two beeps will sound to indicate a successful pairing.
The remote comes paired to the bed. If the remote gets unpaired, do the following to pair the remote:
NOTE:
There are two individual remotes for the two beds. You can either use a separate remote for each
bed, or pair both beds to one remote.
1.
Adjust the bed to your desired position.
2.
Press and hold the memory programmable button for 5 seconds.
3.
Buttons will flash to indicate the position has been saved.
4.
If desired, repeat to set the other memory programmable button.
PRESET 1
PRESET 2
TV
LOUNGE
ZG
M1
10
MIN
TIMER/
ALL OFF
20
MIN
H
E
A
D
F
O
O
T
M2
FLAT
HEAD
FOOT
MODE
TV
LOUNGE
ZG
M1
10
MIN
TIMER/
ALL OFF
20
MIN
H
E
A
D
F
O
O
T
M2
FLAT
HEAD
FOOT
MODE
SETTING PROGRAMMABLE POSITIONS
NOTE:
M1 and M2 buttons do not come programmed. Each button must be individually programmed
before use.
