
REMOTE CONTROL FUNCTIONS
•
Insert 2 AAA batteries into the remote control.
•
After 10 seconds of non-operation, the remote will go into power-saving mode.
Linking the remote control:
1.
Press and hold the car select button for 2-4 seconds. The car select light will flash.
2.
Turn the vehicle on. The car select light will turn off to indicate a successful link.
3.
If the car select light continues to flash (indicating an unsuccessful link), repeat steps 1 and 2.
TROUBLSHOOTING
Reason
Low battery
Electrical protection
Switch not in the correct position
Battery connectors disconnected
Low battery
Overloaded vehicle
Uneven or sloped road
Loose connection to motor
Attempting to shift while vehicle
in motion
Battery connectors disconnected
Charger not connected to socket
or outlet
Battery does not have a full charge
Normal
Problem
Battery is warm and
makes a slight noise while
charging
Slow speed
Vehicles shakes while
driving
Difficulty shifting between
forward/reverse
Battery does not last
Battery does not recharge
Vehicle does not move
Solution
Fully charge the battery
Stop use for several minutes and restart
Completely press in switches
Plug in battery connectors
Fully charge the battery
Reduce the weight on the vehicle
Drive on flat pavement
Ensure the motor is properly connected to
the battery
Only shift when the vehicle is at a stop
Plug in battery connectors
Completely plug in the charger
Fully charge the battery
Normal
Gear boxes are installed
incorrectly
Forward and reverse
switch is flipped (forward
goes in reverse, reverse
goes forward)
Make sure the L gear box is on the left and
R gear box is on the right
SPEED SELECT
TURN LEFT
TURN RIGHT
SPEED
INDICATOR
FREQUENCY
KEY
BACKWARD
FORWARD
PARK
14
|