background image

3

4 PCS

M8 x 16mm 

SCREW

HARDWARE

1

TOOLS REQUIRED

APPROXIMATELY

15 MIN.

ASSEMBLY

1 PERSON

ASSEMBLY

• 

Umbrella base weights are not included. Do not use this umbrella without umbrella base weights.

• 

Place umbrella on a stable and level surface.

• 

Umbrella is suitable for rain showers and light wind.

• 

Do not use umbrella in inclement weather, such as snow, heavy rain, thunderstorms, or strong wind. 

• 

Firmly secure all bolts, screws and knobs before use.

• 

Reconfirm that all bolts, screws, and knobs are secure every 90 days. 

• 

Fasten screws loosely during initial assembly. Do not firmly tighten the screws until the item is 

completely assembled. 

• 

Be aware that some parts are heavy and have sharp edges.

• 

If any parts are missing, broken, damaged, or worn, stop using this product until repairs are made and/or 

factory replacement parts are installed. 

• 

Do not use this item in a way inconsistent with the manufacturer’s instructions as this could void the 

product warranty.

NOTICE

Please retain these instructions for future reference.

4 PCS

WASHER

2

1 PC

KNOB

3

1 PC

SHORT CROSSBAR

PARTS

A

1 PC

LONG CROSSBAR

B

1 PC

BASE

C

WRENCH

(PROVIDED)

Summary of Contents for SKY4114









Reviews: