TROUBLESHOOTING
REASON
Not plugged in
Defective extension cord
Plug in machine
Try without extension cord
Pump intaking air, not water
Incorrect voltage
Overheating protection
Nozzle blocked
Make sure voltage is correct
Let machine cool for 5 minutes
Clean nozzle
Make sure hoses and connections
are tight
PROBLEM
Machine pulsating
Machine starts but does
not spray water
Machine stops
Fluctuating water pressure
Machine not working
SOLUTION
Air in inlet hose
Inadequate water supply
Nozzle blocked
Spray water until reaches
normal water pressure
Make sure water supply
meets requirements
Clean nozzle
Pump/hoses or
accessories frozen
No water supply
Nozzle blocked
Thaw pump/hoses
or accessories
Connect water supply
Clean nozzle
Hose kinked
Straighten hose
|
11
STORAGE
•
Do the following to completely drain machine of water prior to storage:
- Turn off machine and detach water hose/accessories.
- Turn on machine and press the trigger to expel all remaining water from the machine and spray gun.
- Turn off machine and unplug.
•
Wind up hose and cable on the machine. Place spray gun, nozzles, and accessories in their
designated places.
•
Store in a cool, dry place away from direct sunlight and dirt. Do not store in an especially cold or
frozen room.