Pg. 3
SETTING UP THE FOUNTAIN
ADJUSTING WATER FLOW
1.
Place fountain on a stable and level surface.
2.
Within the opening on the back of the fountain,
stand the pump upright in the basin. Make sure
all the connections to and from the pump are
tight and secure.
3.
Route the pump’s power cord through the opening and connect it to the part A power supply.
4.
Carefully pour water into the basin of the fountain. Make sure the pump is completely submerged.
NOTE: The fountain needs approximately 7 liters (1.85 gallons) of water, or filled to 1 inch lower than
the top edge of the back opening.
5.
Plug the power supply into a wall outlet.
NOTE: The first time you operate the pump it can take up to 5 minutes for water to flow properly.
•
Use the water adjustment slider on the pump to
increase or decrease the pump’s water flow.
–
Slide towards the + to increase water flow.
–
Slide towards the – to decrease water flow.
BACKSIDE
