PRODUCT ASSEMBLY
1
Place two part 2 brackets against the wall. With a pencil, mark where to attach the brackets.
NOTE:
Use awning to measure the distance between the brackets; brackets should be
approximately 95 inches apart.
Drill four holes into the wall. Drill approximately a
¼" deeper than the length of the sleeve anchor.
Insert four part 3 sleeve anchors into the holes.
Attach two brackets by tightening the nuts.
NOTE:
Sleeve anchors should only be used on a
concrete or solid wall.
1/4 inch
2
x2
2
3
x4
4
|
