OPERATING INSTRUCTIONS
Basic Security:
1.
Press Start button and display will show “------".
2.
Input one of the two possible codes. The green indicator light will turn on.
3.
Turn knob clockwise to open safe.
Advanced Security:
1.
Press Start button and display will show “------".
2.
Input first code. The display will show “PASS”.
3.
Input second code. The display will show “OPEN” and the green indicator light will turn on.
4.
Turn knob clockwise to open safe.
If wrong code is entered, the display will show “ERROR” and the red indicator light will turn on.
LOW BATTERY
•
To test battery level, press the Start button. If batteries are low, display will show “LOBAT”. Replace the
batteries immediately.
•
After replacing batteries, display will show “GOOD”.
Basic Security:
The lock is unlocked by one (of two) codes.
To set basic security mode, do the following:
1.
Press Start button, then press the 1 key. The display will show “1-----“.
2.
Press the reset button. The panel will beep and display will show “SINGLE” to indicate the basic
security mode is set.
Advanced Security:
The lock is unlocked by two codes entered in succession.
To set advanced security mode, do the following:
1.
Press Start button, then press the 2 key. The display will show “2-----“.
2.
Press the reset button. The panel will beep and display will show “DOUBLE” to indicate the advanced
security mode is set.
SECURITY MODES
6
|
