Pg. 4
2
Remove hardware from part 4 pedal hinge bolt
(right) and insert it through part D right frame,
replacing the hardware in the appropriate places as
shown. Repeat this process on the left side with
part 3 and part E.
NOTE: The left pedal hinge bolt must be screwed
counter-clockwise, and the right must be screwed
clockwise. If the bolt does not screw easily, rotate
the pedal to adjust the height of the bolt.
4
D
1
G
Unscrew the knobs on the left and right frames, install
the parts H and I right/left handle bars, then replace
the knobs to secure the handle bars.
If you would like the handle bars to be fixed in place,
install them in the slots directly above the flywheel.
Secure them with the knobs from the right/left frames.
4
H
I
3
Install part F and G pedals with four part 1 nut and
bolt sets, two on each pedal.
INSTALLING FIXED HANDLE BARS
FRONT VIEW
