7
6
3. Pair your Coda One with your
mobile phone
Prior to using the speakerphone for the first time, you must pair it with
a Bluetooth-enabled mobile phone. Specific pairing steps may vary with
different mobile phones. Please refer to your mobile phone`s user`s manual
for further information. The general pairing steps are as follows:
1) Activate Bluetooth® on your mobile phone
(Setting -> General -> Bluetooth -> on)
For further information on the settings required on your mobile phone,
see the relevant user guide.
2) Ensure that CODA One is turned on, switch to pairing mode by holding
onto the “MFB” button until you hear “Pair mode”. Connection and Call
LED are alternately blinking rapidly in pairing mode.
The first time you turn your CODA One on it will immediately go into
pairing mode.
3) Set your mobile phone to ‘search’ for the CODA One.
4) Select “CODA One” from the search results on your mobile phone.
5) When prompted for the passkey, enter “0000”.
6) When the CODA One is paired, connection LED is blinking. Your mobile
phone might display a confirmation message, also.
※
When the CODA One and phone have been paired once they will
automatically connect when the speakerphone is on and Bluetooth® is
activated on the phone. The CODA One can be used when it is “connected”
to the phone. For further information on the settings required on your
mobile phone, see the relevant user guide.
※
Resetting paired Bluetooth devices: The CODA One saves the last 8
Bluetooth devices that it has been paired with. The list of paired Bluetooth
devices can be erased.
To erase the list, Press the both “MFB” and “Volume down” button until you
hear the beep twice with pair mode.
And the CODA One should be switched off.
