RX610H
User’s Manual
36 RX610H
User’s Manual
1.7.2 CPU and System fan connectors (CPU_FAN1, CHA_FAN1, CHA_FAN2)
The fan connectors support cooling fans of 280mA (3.36 W max.) at 4800rpm
or a total of 1A~2.22A (26.64W max.) at +12V. Connect the fan cables to the
fan connectors on the motherboard, making sure that the black wire of each
cable matches the ground pin of the connector.
CPU_FAN1
1
CHA_FAN1
4. FAN_PWM2
3. FAN_SPEED2
2. +V12
1. GND
1
4. FAN_PWM1
3. FAN_SPEED2
2. +V12
1. GND
CHA_FAN2
4. FAN_PWM3
3. FAN_SPEED3
2. +V12
1. GND
Do not forget to connect the fan cables to the fan connectors. Insufficient air
flow inside the system may damage the motherboard components.
These are not jumpers! DO NOT place jumper caps on the fan connectors.
1.7.3 System Panel (F_PANEL)
This connector is for a chassis-mounted front panel. The functions are as following.
1
2
1. HDD LED+
3. HDD LED#
5. GND
7. RST
9. N/A
2. +5VSB
4. PWR LED#
6. PANSWIN#
8. GND
