BCM QS750, User Manual, Page: 11 / 50

11
2. Features
2
2
.
.
F
F
e
e
a
a
t
t
u
u
r
r
e
e
s
s
2.1 Features Of The Motherboard
The QS750 motherboard integrates the AMD Athlon
microprocessor, memory, I/O and AGP, and is designed to fit
into a ATX form factor chassis. Page 14 illustrates the Layout
for the QS750 motherboard. Below lists the key features
provided by this motherboard:
Processor
Ø
Single Slot-A for Intel AMD Athlon Processor.
Ø
AMD Athlon CPU with built-in 128K L1 Cache & 512K L2 Cache.
Ø
Support AMD Athlon processor speeds
Chipset
Ø
AMD 751/756 AGP/PCI/ISA Chipset, supports 200MHz FSB
Ø
Winbond 83977 ATF Super I/O Controller
System Memory
Ø
Three 168-pin DIMM sockets
Ø
Minimum 16MB up to maximum 768MB Memory Capacity
Ø
Support 100MHz SDRAM DIMM module
PCI Bus Master IDE Controller
Ø
Integrated PCI Bus Master IDE Controller Chip with Ultra-DMA66 capabilities. Up to
four IDE devices can be supported using the two onboard IDE connectors. Also
supported is PIO Modes 3&4, Bus Master IDE DMA Mode 2 and Enhanced IDE
devices such as Tape Backup machines and CD-ROMs. Either the 5.25-inch or 3.5
inch (1.44MB or 2.88MB) floppy drives can be used without requiring an external
card. Additionally, Floppy 3 mode (Japanese standard 3.5 inch disk drive, 1.2MB) and
LS-120 floppy disk drives (3.5 inch disk drive: 120MB, 1.44MB, 720K) are also
supported.
Integrated I/O
Ø
1 Floppy Port (up to 2.88 MB)
Ø
1 Parallel Port (ECP/EPP)