MX945GME
Mainboard
test (POST). A quick POST skips certain steps. We recommend that you nor-
mally disable quick POST. Better to find a problem during POST than lose data
during your work.
Boot Up NumLock Status
This
setting is to set the Num Lock status when the system is powered on.
Setting to [On] will turn on the Num Lock key when the system is powered on.
Setting to [Off] will allow users to use the arrow keys on the numeric keypad.
Typematic Rate Setting
This item is used to enable or disable the typematic rate setting including Typematic
Rate & Typematic Delay.
Typematic Rate (Chars/Sec
)
After Typematic Rate Setting is enabled, this item allows you to set the rate
(characters/second) at which the keys are accelerated.
Typematic Delay (Msec)
This item allows you to select the delay between when the key was first
pressed and when the acceleration begins.
APIC Mode
This field is used to enable or disable the APIC (Advanced Programmable Inter-
rupt Controller). Due to compliance with PC2001 design guide, the system is
able to run in APIC mode. Enabling APIC mode will expand available IRQ re-
sources for the system.
MPS Version Control For OS
This field allows you to select which MPS (Multi-Processor Specification) ver-
sion to be used for the operating system. You need to select the MPS version
supported by your operating system. To find out which version to use, consult
the vendor of your operating system.
Advanced Chipset Features
The sub-menu is used to configure chipset features for optimal system performance.
3-8
