MX610HD User’s Manual
26 MX610HD User’s Manual
1.4.2 Installing a SODIMM
Make sure to unplug the power supply before adding or removing
DIMMs or other system components. Failure to do so may cause
severe damage to both the motherboard and the components.
1.
Hold the SO-DIMM-module by the sides and slide it into the correct slot at the appropriate
angle, golden contacts first
2.
Insert the module carefully until you can no longer see the golden contacts and the
module is snug in its slot.
3.
Ensure that the notches on the sides line up with the rest of the locking mechanism and
then gently push the module flat until the clips of locking arm lock it into place.
1.4.3 Uninstalling a DDR5 SODIMM
1. Release two locking arms, and then allow the lower edge of the SODIMM to pivot
slightly upwards to free it from the holder.
2. Pull the SODIMM down and away from the holder to remove it.
Support the DIMM lightly with your fingers when releasing the locking
arms. The DIMM might get damaged when it flips out with extra force.
A DDR5 SODIMM is keyed with a notch so that it fits in only one
direction. DO NOT force a DIMM into a socket to avoid damaging
the DIMM.
The DDR5 SODIMM sockets do not support
DDR/DDR2/DDR3/DDR4 SODIMMs.
DO NOT install DDR/DDR2/DDR3/DDR4 SODIMMs to the DDR5
SODIMM socket.
Alighn notch key to the rib on the slot
