47
▶
Super IO Configuration
▶
Serial Port 1/ 2/ 3/ 4
This setting enables/disables the specified serial port.
▶
Change Settings
This setting is used to change the address & IRQ settings of the specified serial port.
▶
Mode Select
Select an operation mode for the Serial Port 1.
▶
Parallel Port
This setting enables/disables the parallel port.
▶
Change Settings
This setting is used to change the address & IRQ settings of the parallel port.
▶
Device Mode
Select an operation mode for the parallel port.
▶
FIFO Mode
This setting controls the FIFO data transfer mode.
▶
Shared IRQ Mode
This setting provides the system with the ability to share interrupts among its serial ports.
▶
Watch Dog Timer
You can enable the system watch-dog timer, a hardware timer that generates a reset when the software
that it monitors does not respond as expected each time the watch dog polls it.
