BCM ESM-APLM, User Manual

Page: 44 / 77

ESM-APLM
User’s Manual
44 ESM-APLM User
’s Manual
Item Options Description
Console Redirection
Disabled [Default] ,
Enabled
Console Redirection Enable or Disable.
Console Redirection
Disabled,
Enabled [Default]
Console Redirection Enable or Disable.
3.6.2.6.3 Console Redirection Settings
Item Option Description
Terminal Type
VT100
VT100+
VT-UTF8 [Default] ,
ANSI
VT-UTF8 is the preferred terminal type for out-of-band
management. The next best choice is VT100+ and
then VT100+ and them VT100. See above, in Console
Redirection Settings page, for more Help with Terminal
Type/Emulation.
Bits per second
9600
19200
57600
115200 [Default]
Select serial port transmission speed. The speed must
be matched on the other side. Long or noisy lines may
require lower speeds.
Flow Control
None [Default]
Hardware RTS/CTS
Software Xon/Xoff
Flow control can prevent data loss from buffer
overflow. When sending data, if the receiving buffers
are full, a
‘stop’ signal can be sent to stop the data
flow. Once the buffers are empty, a
‘start’ signal can be
sent to re-start the flow. Hardware flow control uses
two wires to send start/stop signals.