38
1.10.6
Clear CMOS Header: CLRMOS1
There is a CMOS RAM onboard that has the power supplied from an external battery to
maintain the registry settings of system configuration.
For normal state (default), the jumper is set on pin location 1 and 2.
To clear the CMOS, disconnect all power connections to mainboard first, then set the
CLRMOS1 jumper to pin location 2 and 3 for at least 30 seconds while the system is off,
then place the jumper back to pin 1-2 for normal operation.
Avoid clearing the CMOS while the system is ON; this may damage the mainboard.
Summary of Contents for RX110H
Page 17: ...17 1 5 3 Mainboard Layout...
