![background image](http://html1.mh-extra.com/html/bci/one-door-urban-bus-2019/one-door-urban-bus-2019_owners-manual_2714238046.webp)
April 2019
– Issue 4
Page
46
of
48
Appendix - CAN instrument panel operating guide (continued)
Users can set the profile using the following operations:
Please note:
A user can return to the main menu after reviewing the information by choosing “Return” in the main menu,
then pressing down the MENU button to confirm. If a user does not operate the sub-menu page for a long time, the display
will automatically return to the main menu.
First press the MENU-button to enter the instrument panel main menu (figure 4), and then press UP-button, DOWN-button,
LEFT-button, RIGHT-button to move to the preferred "Switch Interface" item, and then press the MENU-button again to enter
this sub-menu, press the UP-button and DOWN-button to choose your preferred interface, When finished, press the MENU-
button again to quit. When any operation or alarm happens, the instrument panel will enter an alarm display interface
automatically.
Figure 4: The Main Menu list for the instrument panel
The results are as shown in figure 5.
Figure 5: Operation Volumes and Alarm Display Interface
The top column shows the instrument panel operation, when it cannot display all the operations, a white arrow will appear on
the right. Press the UP-button and DOWN-button to move to the white arrow, at this point, the white arrow will go green and
means that you can now page. Press the RIGHT-button (or LEFT-button) to look over more operations. In the center of the
LCD screen is the location of the alarm indication (Please refer to Figure 5). The bottom column is an explanation of the alarm
signal. When more than one alarm occurs at the same position (The current screen can show all the alarms), or if the current
screen cannot show all the alarm description, the user can press the RIGHT-button (or LEFT-button) to page to see more
information. If the user presses the MENU-button in any interface, it can show the menu of the center screen, and then press
the UP, DOWN, LEFT, or RIGHT-button to choose what you want to review, press the MENU-button again to confirm the
required interface.
Owner’s Manual