BC lift a/s
15
TROUBLESHOOTING.
Fault
Possible cause
Action
The light does not illuminate
when the key is inserted into the
switch and turned.
- The power supply to the lift
has been disconnected at the
main switch.
- The fuses are faulty.
- The light is faulty.
- Emergency stop activated.
- Switch on main switch, check
the fuses or call for assistance.
- Replace the fuses or call for
assistance.
- Replace the light or call for
assistance.
- Release the emergency stop.
The lift is switched on, but does
not run.
- Emergency stop activated.
- Excess speed control
activated.
- The lift safety system (bars,
ramps, platform) has been
activated.
- Joystick damaged
- Release the emergency stop.
- Call a service company.
- Call for assistance, remove the
obstacle and restart.
- Call a service company.
The lift is switched on, but
cannot be “called”.
- Emergency stop activated.
- Excess speed control
activated.
- The lift safety system (bars,
ramps, platform) has been
activated.
- Operating panel damaged.
- Release the emergency stop.
-
Call a service company.
- Call for assistance, remove the
obstacle and restart.
- Call a service company.
The lift runs and stops suddenly. - Emergency stop activated.
- Excess speed control
activated.
- The lift safety system (bars,
ramps, platform) has been
activated.
- The power supply to the lift
has been disconnected.
- Release the emergency stop.
- Call a service company.
- Call for assistance, remove the .
obstacle and restart.
- Check the main switch and
the fuses or call for assistance.
If you cannot correct the fault, please call our service hotline: BC lift a/s, tel. +45 9843 5444
Summary of Contents for BCSA
Page 21: ...BC lift a s 20 NOTES...
