4
- Some countries do not allow the exclusion or limitation of
incidental or consequential damages or exclusions of
implied warranties. Therefore, the limitations or exclusions
herein may not apply. This warranty gives you specific legal
rights, in addition to other rights which vary from state to
state or country to country.
Warning:
Make sure that the device is not plugged into the
mains before making any connections. It is also recom-
mended to turn off or disconnect all other devices asso-
ciated while making connections to the product.
NEVER OPERATE THE AMPLIFIER WITHOUT HAVING FIRST
CONNECT THE LOUDSPEAKERS. THE PRINCIPLE OF
OPERATION AMPLIFIER TUBE IS DIFFERENT FROM
AMPLIFIER TRANSISTORS; WITHOUT "CHARGES" ENERGY
AMPLIFIER IS DISSIPATED IN TRANSFORMERS OUT WHAT IS
HARMFUL FOR THE DURABILITY OF THE PRODUCT.
Connect the speakers to the speaker jacks on the back and
the sources of the corresponding input jacks on the back.
Connect the power cord to the connector on the one hand
AC Mains product and the other to a wall outlet.
Turn the POWER switch ON .*page 6, button ⑦
on front
panel shematic under the am.
If the unit is equipped with a standby, then press the
STANDBY button to turn it on.
Press the input selector for the source you want to hear.
① AC MAIN INPUT
Once all connections to the amplifier, plug the power cable
into an outlet and turn the unit on. Your amplifier is now
ready for use.
② PHASE TESTER
The EX Series products feature 3-pins mains power cord.
These 3-pins plugs are respectively the Ground, which is
located in the center of the outlet, the Neutral, it is an
electrical reference, and finally the Hot. The latter is that
which "handles" the alternating voltage.
Warranty
Quick starting guide
Rear panel
Basic instructions
Connections to the amplifier
Summary of Contents for EX888
Page 10: ...10 Notes...
Page 11: ...11...
Page 12: ...12 BC ACOUSTIQUE BP 306 94709 Maisons Alfort Cedex France www bc acoustique com...
