7
ENGLISH
FRANCAIS
SP
ANISH
DEUT
SCH
HANDLING DISCS
Do not touch the playback side of the disc. Hold the disc by the
edges so as not to leave fingerprints on the surface. Never stick
paper or tape on the disc.
STORING DISCS
After playing, store the disc in its case . Do not expose discs to
direct sunlight or sources of heat and never leave it in a parked
car in the sun.
CLEANING DISCS
Fingerprints and dust on the disc can cause low quality noises
and sound distortion. Before playing, clean the disc with a clean
cloth. Wipe the disc from the center outward. Never use strong
solvents such as alcohol, benzene, paint thinner, or a special
cleaner commercially available or antistatic spray intended for
vinyl records.
DISC AUDIO CD-R & CD-RW
The EX602 can read CD-R and CD-RW audio discs recorded on
a computer or on a CD recorder. Audio quality CD-R or CD-RW
discs varies widely which may affect readability. Some factors
affecting readability:
• The quality of the disc itself. Overall, blank CD-R/RW
manufactured by renowned companies give better results than
unbranded ones.
• The quality of the CD recorder or player / recorder to the
computer. Some recorders and writers produce better results
than others.
• The CD-R/RW recording speeds. In general, the quality of a
CD-R/RW is best if recorded at low speed rather than a higher
speed.
MP3 PLAYBACK FORMATS up to 320Kbps
The EX602 CD Player can play MP3formatted recordings on
CD-R or CD-RW. You can mix all types of file on disk. Using the
remote control, you can select the desired file and start playing
in the following manner folder or MP3 file:
1 - Load the disc in question.
2 - Press the arrows to select the desired folder.
3 - Press the arrows to select the desired file.
To access the files, the drive must be stopped (STOP) or during
playback.
4 - Press ‘ENTER’ to start playback. For each file, the EX602
will display the file type and a corresponding icon on the LCD
screen. Information such as title, album and artist name, if any,
will parade on the LCD screen during playback.
Notes about the CD
Remarks
• The number of files depends on the disc and not on the
folder’s name; in other words , the file number is assigned in
order of reading on the disc.
• If you want to select the file number 9 on a disc that contains
over 100 MP3 files, you must enter the «009» number.
PROGRAMMING
The program function enables you to store your favorite tracks
in the player’s memory from any disk. When programming
a sequence of songs, the EX602 must be on ‘STOP’ mode
(no disc playing). Using the remote, enter the desired program
sequence as follows :
1 - Press the ‘PROGRAM’ key.
The display shows «P01 T00.» The «00» to «T00» will blink,
which means that the reader expects you to enter the first track
to be programmed.
2 - Use the numeric keypad to directly enter the first track of
your programming. When you enter the track number, the LCD
display will briefly show the total number of tracks and the total
playing time of the programmed tracks, such as «TTL 3:58 01.»
3 - The screen will then return to display «P02 T00», indicating
that the reader expects you to enter the second track of your
programming. By entering the second track, the LCD will display
briefly again the total number of tracks and the total playing
time of the programmed tracks, such as «TTL 6:45 02».
«02 TTL» indicates that there is now a total of two programmed
tracks with a total playing time of « 6:45 ».
4 - Repeat steps 2 and 3 to select and record additional tracks
in memory, up to 40 tracks. If you try to program more than 40
tracks or files, the message «P- FULL» will appear on the LCD
screen.
5 - Press ‘PROGRAM’ to finish or complete your programming
- the last programmed track number will appear on the LCD
screen.
6 - Press « START» icon to start playback.
