4
- Some countries do not allow the exclusion or limitation of
incidental or consequential damages or exclusions of
implied warranties. Therefore, the limitations or exclusions
herein may not apply. This warranty gives you specific legal
rights, in addition to other rights which vary from state to
state or country to country.
Make sure that the device is not plugged into the mains
before making any connections. It is also recommended to
turn off or disconnect all other devices associated while
making connections to the product.
Connect the speakers to the speaker jacks on the back and
the sources of the corresponding input jacks on the back.
IMPORTANT:
Make sure you have set the voltage selector
to suit your Country:
⑤ INPUT VOLTAGE: AC110 (USA)
and AC230 (EUROPE).
Connect the power cord to the connector on the one hand
AC Mains product and the other to a wall outlet.
Turn
the
POWER
switch
(POWER)
ON
(ON).
If the unit is equipped with a standby, then press the
STANDBY button to turn it on.
Press the input selector for the source you want to hear.
WARNING:
Be sure to turn off the power switch on your
product before making any connections. Similarly it is best
to cut the power of the other devices you want to connect
to your amplifier.
① INPUTS (INPUT - RCA)
The AUX1, AUX2, TUNER, CD are designed to connect
sources "line level" to your amplifier. These inputs are
designed for so-called "analog" signals (as opposed to
"digital" signals). Compatible cables are made with these
type "RCA", they are traditionally identified by a color code
"RED" to the RIGHT and "WHITE" channel for the LEFT
channel.
② OUTPUTS (OUTPUT - RCA)
REC
It allows to retrieve the selected amplifier to "source" level
audio signal that is independent of the level volume
control. This output is traditionally used to connect the
amplifier to a recording device.
LINE
It allows to retrieve the selected audio amplifier in
proportion to the level of volume control signal. This output
is mainly used to connect an additional power block to
perform a "bi-amplification".
③ DIGITAL
Your amplifier has a built-in digital-to-analog converter.
Therefore it is possible to connect a digital source (such as
most modern television screens).
To ensure compatibility with all existing types of digital
terminals, the amplifier has an "optical" socket and a
"coaxial). However this entry is unique and it is possible to
connect one device at a time.
④ LOUDSEPAKER TERMINALS
Connect the speaker to the terminals marked RIGHT "+ R"
and "R -" ensuring that "R +" is connected to the "+"
terminal of the enclosure and "R -" is connected to the
terminal "- "the same enclosure. Connect the LEFT speaker
to the terminals marked "L +" and "L -" by doing the same.
Make sure that no wires are not insulated can bypass the
speaker outputs. Make sure that the speaker terminals are
tight enough to ensure a good electrical connection. If the
terminal screws are not tight enough, the sound quality
may be affected.
Basic instructions
Quick starting guide
Warranty
Connection to the amplifier
Rear panel
