2
1- Turn off the amplifier.
2- Remove the power cord from the amplifier.
3-
.
Connect using a stereo RCA cable the output of your
turntable to the "PHONO IN" input of the EX PHONO 2X
card.
.
Note: Depending on the cell of your turntable, adjust the
selector to MM (moving magnet) or MC (moving coil).
4-
.
Using the RCA stereo cable supplied with the card,
connect the "LINE OUT" output of the card to a stereo RCA
inputs on your amplifier.
5-
.
Connect the 3 pins cable supplied with the card on
"12V POWER" input, and the "optional board power"
output of your dedicated amplifier.
6- Connect the power amplifier cord, turn on the amplifier
and select the input to which you connect your turntable
using the EX PHONO 2X card and enjoy the sound!
For repair, during or after the warranty, please contact your
dealer.
To obtain warranty service and technical support, thank you
kindly to register your product online on the website
www.bc-acoustique.com at the product registration
section.
BC ACOUSTIQUE
BP 306
94709 Maisons-Alfort Cedex France
www.bc-acoustique.com
Quick installation guide
Troubleshooting
