7
EN
G
LIS
H
HANDLING DISCS
.
Do not touch the playback side of the disc. Hold the disc by
the edges so as not to leave fingerprints on the surface.
Never stick paper or tape on the disc.
STORING DISCS
.
After playing, store the disc in its case . Do not expose discs
to direct sunlight or sources of heat and never leave it in a
parked car in the sun.
CLEANING DISCS
.
Fingerprints and dust on the disc can cause low quality
noises and sound distortion. Before playing, clean the disc
with a clean cloth. Wipe the disc from the center outward.
Never use strong solvents such as alcohol, benzene, paint
thinner, or a special cleaner commercially available or
antistatic spray intended for vinyl records.
DISC AUDIO CD-R & CD-RW
.
The EX602 can read CD-R and CD-RW audio discs recorded
on a computer or on a CD recorder. Audio quality CD-R or
CD-RW discs varies widely which may affect readability.
Some factors affecting readability:
.
• The quality of the disc itself. Overall, blank CD-R/RW
manufactured by renowned companies give better results
than unbranded ones.
.
• The quality of the CD recorder or player / recorder to the
computer. Some recorders and writers produce better
results than others.
.
• The CD-R/RW recording speeds. In general, the quality of
a CD-R/RW is best if recorded at low speed rather than a
higher speed.
MP3/WMA PLAYBACK FORMATS
.
The EX602 CD Player can play MP3/WMA formatted
recordings on CD-R or CD-RW. You can mix all types of file
on disk. Using the remote control, you can select the
desired file and start playing in the following manner folder
or MP3/WMA file:
1 - Load the disc in question.
2 - Press the arrows to select the desired folder.
3 - Press the arrows to select the desired file.
To access the files, the drive must be stopped (STOP) or
during playback.
4 - Press *ENTER+ to start playback. For each file, the EX602
will display the file type and a corresponding icon on the
LCD screen. Information such as title, album and artist
name, if any, will parade on the LCD screen during playback.
Remarks
• The number of files depends on the disc and not on the
folder’s name; in other words , the file number is assigned
in order of reading on the disc.
• If you want to select the file number 9 on a disc that
contains over 100 MP3/WMA files, you must enter the
"009" number.
.
PROGRAMMING
The program function enables you to store your favorite
tracks in the player's memory from any disk. When
programming a sequence of songs, the EX602 must be on
*STOP+ mode (no disc playing). Using the remote, enter the
desired program sequence as follows :
.
1
- Press the * key.
.
The display shows "P01 T00." The "00" to "T00" will blink,
which means that the reader expects you to enter the first
track to be programmed.
.
2
- Use the numeric keypad to directly enter the first track
of your programming. When you enter the track number,
the LCD display will briefly show the total number of tracks
and the total playing time of the programmed tracks, such
as "TTL 3:58 01."
3
- The screen will then return to display "P02 T00",
indicating that the reader expects you to enter the second
track of your programming. By entering the second track,
the LCD will display briefly again the total number of tracks
and the total playing time of the programmed tracks, such
as "TTL 6:45 02" - "02 TTL" indicates that there is now a
total of two programmed tracks with a total playing time of
" 6:45 ".
4
- Repeat steps 2 and 3 to select and record additional
tracks in memory, up to 40 tracks. If you try to program
more than 40 tracks or files, the message "P- FULL" will
appear on the LCD screen.
5
- Press * to finish or complete your
programming - the last programmed track number will
appear on the LCD screen.
6
- Press « START» icon to start playback.
Notes about the CD
