10
Connecting the HDMI monitor
1. Plug-in HDMI lead from FBM into monitor.
2. Plug in power into HDMI monitor.
3. The monitor can be either freestanding or mounted
onto the back of FBM.
Setup - Order of Install
Unpack
Connect
HDMI
Monitor
Connect 1 keypad (supplied) to any of the powered key ports
Connect video to input 1
Connect monitor to output 1
Power ON the FBM, FBM Monitor and relevant peripherals
- Wait for the system to boot.
Connect to matrix WIFI with computer
Use web page interface to setup system settings
Check PTZ control with keypad
Connect remaining video sources
Connect monitors & extra keypads
If you have alarms, connect Alarm Cards
1
2
3
4
5
6
7
A
HDMI monitor setup
1. Power ON
2. Press ‘AUTO’ button
3. Select HDMI
4. Use +/- key to save setting
C
Wait for system screen on the monitor
(As shown in the photo on the right).
D
Step by Step Guide
This step-by-step guide can be used in conjunction with ‘figure 1’ on the previous page.
8
9
10
11
12
Make relevant connections as shown
on previous page (figure 1)
1. Connect power to the matrix, the monitor and any
relevant peripherals.
2. Connect one keypad, then set keyboard addresses
(p16).
B
Summary of Contents for FBM
Page 2: ......
Page 4: ...Scan for a quick tour of the BBV website www bbvcctv com...
Page 45: ...45 Example Setups...
Page 52: ......
