BBV BBV-Matrix-IF, Installation Manual

Page: 15 / 20

15
The Matrix Interface has been designed to work using standard goto & save preset commands. The manual will refer to # 1 to
58, Wash Wipe & Lights, Patrol 1 & 2 and AutoPan.
The table below shows the preset number needed to achieve the desired Function.
BBV Matrix Commands
Pelco ASCII Pelco D
Enter matrix menu then Password 999999, then
Select while in Menu
NEXT
# Goto Preset 60
1 # Goto Preset 61
Save Preset 95
Goto Preset 61
2 # Goto Preset 62 Goto Preset 62
3 # Goto Preset 63 Goto Preset 63
4 # Goto Preset 64 Goto Preset 64
58 # Goto Preset 65 Goto Preset 65
Patrol 1 Goto Preset 66 Goto Preset 66
Patrol 2 Goto Preset 67 Goto Preset 67
AutoPan Goto Preset 68 Goto Preset 68
Wash On then Goto Preset 81
Wash Off then Goto Preset 82
Wipe On then Goto Preset 83
Wipe Off then Goto Preset 84
Lights On then Goto Preset 85
Lights Off then Goto Preset 86
Tx1500 Triangle key then
Iris Open Iris Open
Iris Close Iris Close
Zoom In Twist joystick knob clockwise to zoom in Zoom In
Zoom Out Twist joystick knob counter clockwise to zoom out Zoom Out
Focus Near Focus Near
Focus Far Focus Far
Goto Preset No
PGM
ACK
3
3
AUX ON
AUX ON
AUX ON
AUX ON
AUX OFF
AUX OFF
AUX OFF
2
2
1
1
4
OPEN
CLOSE
NEAR
FAR