BBT BBT-LM-SPBSES Owner'S Manual Download Page 9

Page: 9 / 18

WWW.BBTA.COM.AU

BBT-LM-SPBSES

ASSEMBLING

Handle

• Open out the handle and screw the handle parts with the two

screws and plastic nuts. Put the recoil starter on the right of the
handle and fix the cable with the plastic collar.

• Introduce the rope of the recoil starter handle on its support

guide rope.

Armrest Panel

Accessories:

•  1x plastic panel in red
•  2x plastic washers in black
•  4x self-tapping screws

Installation steps:

Assembly and Remove the battery

Assembly

1. First find the support catch and insert the black

plastic washers into the support catch with their
mounting holes facing outward (as shown in the
following figures).

2. Properly position the backing panel so that the back

plate screw holes can match the plastic washers for
proper mounting.

3. Tighten the screws, end of assembly.

1. Press and hold the

battery latch buttons
at both sides of the
battery pack.

2. Make sure latch on

bottom of battery
pack snaps in place
and that battery pack
is fully seated.

1. Press and hold the

battery latch buttons
at both sides of the
battery pack.

2. Remove battery pack

from the mower.

Remove

Summary of Contents for BBT-LM-SPBSES



















Search results

Summary of Contents for BBT-LM-SPBSES

Reviews:

Related manuals for BBT-LM-SPBSES

Brands by name

Popular brands

BBT BBT-LM-SPBSES, Owner'S Manual

Search results

Summary of Contents for BBT-LM-SPBSES

Reviews:

Related manuals for BBT-LM-SPBSES

Brands by name

Popular brands