SETTINGS
RGB MODE
RGB mode can be set by the help of RGB/VGA Switch (6). Switch position 1 is for the 15khz RGB
mode, or 480i. If you change it to position 2, it will display 31khz VGA video or 480p. Currently Akura
only supports VGA compatible games.Some games are not compatible with the VGA mode, and the
console checks the type of cable plugged while booting, so it refuses to boot if the game doesn't
support the VGA mode. To eliminate this problem you can trick the console while booting(after the
beep sound) by switching to position 2 (VGA mode). This can work on most of the games, however
some games still may not support it, please check the incompatibility list on the web.
SCANLINES ON/OFF
Scanliner function can be turned on or off by the ON/OFF switch (5). When it’s in position 2,
scanlines will be displayed, when it’s switched to position 1, scanlines won’t be displayed.
This feature can be used on the fly, however it’s recommended to do it while the console is turned
off.
SCANLINES WIDTH SELECT
It’s possible to change the width of the scanlines, position 2 is the default mode which is thinner
scanlines (single line), position 1 is for the thicker scanlines (double lines).
EVEN / ODD SCANLINES
EVEN/ODD switch is used for selecting either even scanlines to be displayed or odd ones according
to your preferences.
BONUS MODE : LUMINOSITY ADJUSTMENT
As a bonus feature, while the EVEN/ODD switch is set to position 1, and the scanlines are turned off
(position 1) Akura can display a darker image without scanlines and when the EVEN/ODD switch is
set to position 2 again, it will display in its normal brightness.
5