bbraun 8717070, Service Manual

Page: 63 / 106

3 Disassembly / Assembly
Infusomat® compact
plus
P 1.0 3 - 31 EN
For internal use, only
3.16 POWER SUPPLY Designation Ord. No.
Power supply CP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34522000
Housing, bottom part ICP. . . . . . . . . . . . . . . . . . . . . . . . . .34522208
Screws
( see "Sets of small parts"
➡
p. 3 - 1 )
Disassembly
✓
Gasket for rubber connector has been removed
( see "Gasket for rubber connector"
➡
p. 3 - 5 ).
✓
Unit has been opened.
1. Unscrew the two screws ( Fig. 3 - 44 / Item 1 ) using a 10IP
TORX plus screwdriver.
2. Remove the power supply ( Fig. 3 - 44 / Item 2 ).
3. If the housing, bottom part ( Fig. 3 - 44 / Item 3 ) has to be
replaced, additionally remove the housing front ( see "Housing
front"
➡
p. 3 - 22 ) and the lock screw ( Fig. 3 - 45 / Item 1 ).
Fig. 3 - 44
1 Screw DELTA PT 30x9 WN 5454
2 Power supply
3 Housing, bottom part
1
2
3
Fig. 3 - 45
1 Lock screw
1