GSF2818KSN
Owner’s Manual
12
Fully Assembled View
Left Side
Right Side
Step 15 (Rotisserie motor installation. Option)
a)
Take two pre-installed screws on motor support (KB) apart.
b)
Align the holes on the motor support (KB) with the hole on the
left side wall of firebox.
c)
Insert one bolt, one flat washer, on spring washer and one nut
into each drilled hole and tighten by screw driver provided.
d)
Install rotisserie motor (KA) by insert the slot on it into the
motor support.
Step 16 (Install the rotisserie kit on grill. Option)
a)
Insert the shaft on fork side into the motor.
b)
Move the roller and put it into the slot on right side wall
of the firebox.
c)
Tighten the screw on roller by hand.
Note: Make certain the shaft will be not pulling out from
the motor during operation.
