GSF2818K
Owner’s Manual
7
Assembly Instructions
Remove all contents from the carton packaging. Make sure
all parts are present before attempting assembly. Once the
grill is fully assembled, go back and check to make certain
all the bolts are secure. Tighten again using the screwdriver
provided if necessary.
Estimated Assembly Time: 30 minutes.
Step 2 (The cart assembly)
a)
Push the cart front frame (W) and cart right
side panel (V) together and connect well,
then push the cart back panel (U) and cart
right side panel (V) and connect well. Make
certain the connections are secure.
b)
Align the two holes on the cart front frame
(W) with the two holes on cart right side
panel (V). Insert one bolt (AA) with one
spring washer (CC) and one flat washer (BB)
into each pre-drilled holes. Tighten bolts by
hand until secure.
c)
Repeat the procedure for the cart right side
panel and cart back panel assembly.
d)
Repeat the procedure for the left side cart
panel (F) assembly.
e)
Go back and tighten all bolts using the
screwdriver provided.
Step 3 (The heat insulation panel assembly)
a) Align the two holes on cart left side panel (F) with the
two holes on heat insulation panel (E).
b) Insert one bolt (AA) with one spring washer (CC) and
one flat washer (BB) into each pre-drilled holes. Tighten
bolts by hand until secure.
c) Repeat the procedure for the heat insulation panel and
cart right side panel assembly.
d) Tighten all bolts using the screwdriver provided.
Step 1 (The swivel caster assembly)
Note: Before beginning assembly, make certain the two
swivel casters on the back panel are locked.
a) Align the two holes on swivel caster (Y) with the two
holes on front frame (W).
b) Insert one bolt (AA), one spring washer (CC), one flat
washer (BB), one nut (JJ) and one bolt (KK) into each
pre-drilled holes by hand.
c)
Go back and tighten all the bolts using the screwdriver
provided.
