BBQ GPT1813G, Owner'S Manual

Page: 9 / 16

GPT1813G
Owner’s Manual
9

BB M5 × 10 Bolt 8 PCS
DD Flat washer 8 PCS
CC M5 Spring washer 8 PCS
EE M5 Nut 8 PCS
HH Flat washer 4 PCS
GG Spring washer 4 PCS
II M6 Nut 4 PCS
Step 4
a) Align the holes on the lower right front side
and lower right back side of the body
assembly with the holes on the right leg (N).
b) Insert one bolt (BB) into each pre-drilled
hole and seal it with one flat washer (DD),
one spring washer (CC) and one nut (EE).
c) Repeat the procedure for the left leg (M).
d) Go back and tighten all the bolts using the
screwdriver provided.
Insert the ignition cable into the electrode
underneath the firebox.
Step 3
a) Align the holes on the left side of the
firebox with the holes on the heat plate
support (I).
b) Insert the bolts on left handle (J) into each
pre-drilled hole and seal one flat washer
(HH), one spring washer (GG), and one
nut (II) in sequence.
c) Repeat the procedure for the right handle
(K) and another heat plate support (I) with
the right side of the firebox.
d) Go back and tighten all the nuts using the
wrench provided.
e) Insert the ignition cable into the
electrode underneath the firebox. (See
the figure to right).