Hardware Used
x 10
M6x12
Screw
10
ASSEMBLY INSTRUCTIONS
Lock
Washer
x 10
3) Install the grill housing assembly using
six
washers (GG), lock washers (HH), and M6x12mm
screws (BB) as shown. First insert the back screws in an alternating pattern (install one screw
on the left then install the next screw on the right side).
NOTE: DO NOT TIGHTEN SCREWS UNTIL ALL FASTENERS ARE INSTALLED
4) Install the left side control panel with the grill housing assembly control panel using one
M4x10mm screw (CC) as shown.
M4x10
Screw
Washer
x 1
x 6