Char
BBQ-PRO Charcoal Grill Assembly Instructions
Page 4
Remove all the parts from the carton
and lay them out on a smooth, clean
surface. Verify the presence of all
parts by comparing to Hardware
and Parts Lists on previous pages.
Do not throw away any of the packaging
until you locate all the parts.
STEP 1:
Attach lid vent assembly (H)
by inserting damper bolt (3) through
lid vent assembly (H), and lid (A).
Inside of lid, place 1 fiber washer (8)
and 1 winged nut (4) onto damper bolt (3)
and tighten.
Attach lid handle (M) by inserting 2
handle bolts (2) through 2 metal
washers (9), lid bracket (L), 2 fiber washers (8)
lid (A), 2 fiber washers (8) and into lid handle (M).
STEP 2:
Attach stationary legs (F) of grill by inserting a leg bolt (1)
through metal washer (9), bottom bowl (B), leg bowl (K), and screwing
bolt (1) into stationary leg (F). Repeat procedure for the other stationary leg,
Do not fully tighten until finishing the grill assembly.
Attach wheel legs (G) of grill by inserting a leg bolt (1) through metal washer (9),
bottom bowl (B), leg bowl (K), and screwing bolt (1) into wheel leg (G).
Repeat procedure for the other wheel leg.
Do not fully tighten until finishing the grill assembly.
Customer Service-1-877-998-1697
