4
D
YNA
Q
F
EATURES
- Connects to your
Bluetooth
®
enabled device for direct access to temperatures using the BBQ Guru app
- Patent pending 15 multi-colored LED Q light ring indicates real-time pit and fan statuses at a glance
- Smart Cook full-time adaptive control algorithm learns the pit for better stability and accuracy
- Armored, dishwasher-safe, high-temperature pit and food probes
- Controls your pit and monitors up to one food temperature
- Open lid detect senses when the pit’s lid is open to minimalize temperature disturbance
- Patented low and slow Ramp Mode lowers the pit temperature so the food does not overcook
- 32°F to 475°F range with ± 2°F accuracy
- Included patent pending 5-in-1 magnetic control mount allows viewing from any angle
- Runs on 110-240VAC for worldwide use or 12VDC for automotive supply use
5
P
REMIUM
D
ISHWASHER
-S
AFE
P
ROBES
The probes provided with the DynaQ are precision stainless-steel thermocouples. The thermocouple wires have
an armor braid with moisture and smoke resistant Teflon insulation that is rated for steady-state temperatures up
to 500°F. Do not kink the wires, or let them come in contact with direct flame. They can be handwashed or
placed in a dishwasher for cleaning. The probes are user-replaceable and are available at
Keep a spare set for unforeseen emergency situations.
NOTE:
Fully insert the probes into the control. Push the plugs into the receptacles so that they physically and
audibly snap in place. If the probes are not plugged in securely, there may be erratic temperature readings and
the DynaQ will not control temperature accurately. The temperature could also read low, causing the pit to get
excessively hot.
NOTE:
Each probe jack has an LED indicator light above it. If a probe is securely plugged into the jack while
the DynaQ is powered on but the LED does not illuminate, this indicates that the probe is damaged or broken
and is not reading temperature properly.
NOTE:
The pit probe must be placed inside of the pit at the cooking area for proper temperature regulation. If
the pit probe is not placed properly inside the pit, proper control will not take place. This can cause the fan to
run constantly, causing the pit to become excessively hot.
NOTE:
Some ceramic grills present a special-case situation that can lead to early probe failure. If using a heat
diffuser, run the probe cables over one of the ceramic legs. The heat coming up through the gaps is intense and
focused, and if the cable is exposed to this heat, it begins to break down much more quickly than usual. Any
heat or flame event inside the pit can send a blast of heat – even flames – up the inside of the pit, sometimes
ruining a probe instantly. With proper care, a probe has a 2 to 3 year life expectancy.
6
V
ARIABLE
F
LOW
R
ATE
P
OWER
D
RAFT
F
ANS
The fan system uses a variable flow rate to fine-tune the amount of oxygen given to the fire.
All fans are equipped with an adjustable damper and an aluminum nozzle.
Summary of Contents for DynaQ
Page 1: ...DynaQ User Guide...
