1.Mixer...
Mixer...
Digital output
Tuning
Configuration
Stereo mix
Surr. Mix
Low band
Channels
Delays
PRO Logic II
St.
L+R
sum
FSW
Off
Stereo
5.1
Configuration
Stereo mix
Surr. Mix
Low band
Channels
PRO Logic II
Delays
St.
L+R
sum
FSW.
Off
◆
◆
◆
◆
◆
◆
◆
◆
◆
Optional setting: S-Video,Component , SCART .
Default: Component.
When using RGB outputs from the SCART
interface,please select RGB. Other wise ,
please select Com-ponent,and when using S-
Video output please select S-Video.
4.TV format: To set the aspect ratio of this
player’
s output image.
Optional setting: 4:3 Pan-scan, 16:9 letterb.,
16:9 TV.
Default: 16:9 letterb.
5.Sharpness:Used to set the sharpness of video
outputs.
Optional setting: High, Medium, Low.
Default: Low.
Optional setting: High, Medium, Low, Off.
Default: Off.
7.Brightness:Used to set the brightness of video
outputs.
8.Contrast:Used to set the contrast of video
outputs.
9.Hue: Used to set the hue of video outputs.
10.
A.
B.
2.4.4 Sound
6.Gamma emendation:This item is used to setup
the Gamma value of video output.
Saturation: Used to set the saturation of
video outputs.
Brightness, contrast, hue and saturation
adjusting means:
Press [UP/DOWN] arrow in the video setup
menu to select the desired item you want to
adjust. Press [OK] or [RIGHT] button to enter
the item's adju- stment.
Press [UP/DOWN] arrow to adjust the setting
value.
◆
A.Configuration: To set this player’
s DOWNMIX
mode to change multi-channel audio into two
channel audio.
Optional setting: Stereo, 5.1.
Default: Stereo.
B.Stereo mix: To set the output means of the left
or right audio when playing a Dolby disc with
separate two-channel audio.
Optional setting: L+R, L, R.
Default: L+R.
C.Surr. Mix: To set output means of the surround
left and right audio when playing a stereo disc.
Optional setting: Off, sum, Virt.Surr.
Default: Off.
D.Low band: select the channel that you desire
to output low frequency signal.
Optional setting: Front F, Center C, Surround
Sr, Subwoofer SW.
Default: Front F, Subwoofer SW.
E.Channels:
◆
◆
◆
◆
◆
◆
◆
◆
To set volume of each individual
channel.
a. Press [UP/DOWN] navigation keys to select
CHANNEL TRIM, then press the [OK] or
[RIGHT] navigation key to select ENTER
SETUP PAGE as shown in the TV screen:
16
Volume
L
FRONT
surround
R
l
r
Center SW
16
16
16
16
16
16
b.Press [LEFT/RIGHT] navigation keys to select
the desired channel to adjust.
c.Press [UP/DOWN] navigation keys to raise or
lower volume of the channel.
d.Press [OK] or [LEFT] to return to the Mix..setup
page.
F.Delays:To set delay time of theCenter/
Surround /Subwoofer Speaker.
A.Press [UP/DOWN] navigation keys to select
Delays in Channels item, then press [OK] or
[RIGHT] navigation key select ENTER SETUP
PAGE as shown in the TV screen.
Center
LS/RS
Subwoofer
0cm
0cm
180cm
b.Press [UP/DOWN] navigation keys to Select
the desired item oup Press [OK] or [RIGHT]
button to enter setting.
- 8 -
