BBK DK2810HD, Service Manual

Page: 13 / 132

2.3.4 Sound settings menu
1. Mixer
A) Configuration: setting of the mode for
conversion of the 5-channel signal to stereo
signal
#Options: Stereo, 5.1.
#Default option: 5.1..
#5.1 mode must be supported by the disc
Number of muic accompaniment channels
depends on the specific disc.
#Adjustment of the central speaker and surround
speakers is available only if the Configuration
option is set to 5.1 position.
B). Stereo mix: playback set-up while playing the
disc with two independent audio channels.
#Options: L+R, L, R.
#Default option: L+R.
C) Surr. Mix: set-up of surround options while
playing the stereo disc.
#Options: Off, sum, Virt. Surr.
#Default options: Off.
D). Low band: distribution of low frequencies
through channels.
#Options: Front F, Center C, Surround Sr,
Subwoofer SW.
#Default options: Front F, Subwoofer SW.
#If you want the low-frequency component of the
sound signal enter only the subwoofer channel,
select and confirm the parameter Subwoofer
SW.
E. Channel settings: separate adjusting of
volume by channels.
#Select the channel you want.
#Adjust the sound volume of each channel using
the wheel.
#Press the OK to return to sound settings menu.
- 9 -
F) Delay of the channel: set-up of signal delay in
speaker channels(central, rear and subwoofer).
#Using the Jog Dial, select the channel, for
which you want to set up the delay, and press
OK for confirmation.
#Using the Jog Dial set up the desired distance
from the listener to each speaker(detailed
description of this operation see on page43)
#Press LEFT key of the cursor to return to
speaker configuration menu.
G). PRO Logic ll: function of stereo sound
conversion to 5-channels sound.
#Options: On, Off, Auto.
#Default option: Off.
#In Auto position, the DVD player determines
itself, when to use the PRO Logic ll decoder.
Some discs do not support this function.
2.Digital audio output
A) SPDIF format: set-up of digital audio output
options.
#Options: RAW, PCM.
#Default option: RAW.
#When you select the RAW option, the not
decoded signal is transferred to the DVD
receiver’
s digital outputs, the decoded signal
is transferred to analog outputs. Decoding is
performed by the built-in decoder of the DVD
receiver.
This feature is meant to ensure that signal
decoding at digital outputs is performed by an
extermal device (e.g.an amplifier).
#If you select the PCM option, a PCM coded
signal will be transferred to the DVD receiver’ s
digital outputs.
B)LPCM: set-up of digital audio output options to
comply with different ampllfiers and recelvers.
#Options: 48 kHz 16 bit,96 kHz 24 bit, 192 kHz
24 bit.