background image

 

 

ENGLISH (US)

 

 

Page 7 of 28 

OTH-SEM250-0356 Rev D

 

Warranty conditions may differ in some countries.  Contact your Customer Service provider 

for warranty terms. 
Risk of loss or damage during shipments under this warranty shall be borne by the party 

shipping the Product.  Products shipped by the Purchaser under this warranty shall be suitably 

packaged to protect the Product.  If Purchaser ships a product to BBI in unsuitable packaging, 

any physical damage present in the Product on receipt and inspection by BBI, and not previously 

reported, will be presumed to have occurred in transit and will be the responsibility of the 

Purchaser. 

2.8.1.

 

Exclusions 

The use of the instrument in a manner different that that described in this manual may result in 

improper function.  This warranty is limited to defects and materials that can be attributed to a 

fault or defect within the SEM Scanner. 
This warranty does not extend to any Warranted Products or parts thereof: (a) that have been 

subject to misuse, neglect or accident, (b) that have been damaged by causes external to the 

Warranted Product, (c) that have been used in violation of the BBI Instructions for Use, (d) on 

which the serial number has been removed or made illegible, (e) that have been modified by 

anyone other than BBI or its authorized service center, unless authorized prior to such service 

by BBI, (f) that are equipment sold as used, or (g) that are exposed to agents listed in   
Table 1, b
elow.    
Table 1 
is not an exhaustive list of agents which may compromise the integrity of the SEM 

Scanner.  

Table 1. Agents That Should Never Be Used on the SEM Scanner 

Severe Effect – NOT Recommended 

Benzene 

Cyclohexane 

Kerosene 

Nitric Acid – 70% 

Carbon tetrachloride 

Ethyl Chloride 

Trichloroethylene 

Perchloroethylene 

Chlorobezene 

Freon 

Lacquer 

Toluene 

Chloroform 

Gasoline, unleaded 

Naphtha 

Xylene 

 

2.8.2.

 

Disclaimer of Additional Warranties 

No distributor, dealer or other party is authorized to make any warranty on behalf of BBI, or 

to assume for BBI any other liability with respect to the SEM Scanner. 
The contents of these Instructions for Use do not constitute a warranty. 

Summary of Contents for Provizio SEM





























Reviews: