BBH SCU Series Programming Manual Download Page 50

Page: 50 / 252

Programming manual SCU-series

HB-37500-820-10-12F-EN SCU Programming manual

Page 50 of 252

Status: 19.03.2021

4.3.12. Library window

The

window “

Library

”

is the main tool for the user to insert elements into a document. The window

“

Library

”

consists of drop-down folders. Every folder contains one element or several elements.

Folders and elements are filtered in the browser or in the work surface. With the

buttons “

Large

icons

” and “

Small icons

” situated at the

top of the window, you can switch between the view sizes

of the elements. To insert an element into a document, the user must drag the element from the

window “

Library

”

to the work surface and drop it there.

Figure 22 Dragging an item from the library window

Summary of Contents for SCU Series





























































































































































































































































Search results

Summary of Contents for SCU Series

Reviews:

Related manuals for SCU Series

Brands by name

Popular brands

BBH SCU Series, Programming Manual

Search results

Summary of Contents for SCU Series

Reviews:

Related manuals for SCU Series

Brands by name

Popular brands