14 |
P a g e
FAQ - TROUBLE SHOOTING
Power is on but the display is not
1. Press a button to activate, if Display has been set to "
Off after 2 minutes
"
2. Check if the light is on in your PSU
The luminaire is flashing
1. Check to see if you have set it for strobing.
2. Check your patch
3. You are in the Color or Length menu
In manual mode “
ENTER
” only switches between
“
MANUAL
” and the saved light level in the display, but
not in the output.
1. Check that “
noDMX
” is not set to “
Man
”
The
Pipeline 4 way controller
does not respond to DMX
1. Is a DMX cable correctly connected to DMX IN
2. Is the “DMX present” indicator ON
3. Check under “
DMX In
” in the menu under "
Tools
" if the unit
receives any DMX values on the respective channels.
Some or all pipes do not switch on
1. You are in "
CCT8/CCT16
" mode and the pipe Color is set to "
4300K
","
None
" or "
Uknown
"
2. You have by accident set the pipe Color to "
none
"
Summary of Contents for Pipeline 4 Way Controller
Page 1: ...1 P a g e...
Page 4: ...4 P a g e...