6
4. Lay the Frame Pad (6) on the frame. Adjust the
position of the Frame Pad so the notches are
aligned with the Legs (3) as shown. Be sure
6 Enclosure Frame Openings are fitted to the
POD-connector position.
Do not use the trampoline without the Frame
Pad (6), which is designed to reduce the likeli-
hood of injury to the user from coming in con-
tact with the trampoline frame. If you do not
have a Frame Pad, contact your dealer to
obtain one. Properly install the Frame Pad
before using the trampoline.
4
5.
Repeat this step with the remaining straps which at
middle position of each pad section (not shown).
6.
7LH'RZQZHEELQJ
7LH'RZQZHEELQJ
6SULQJ
95LQJ
POD-connector
Frame pad (6)
Enclosure frame opening
Look under the trampoline. There is a
series of webbing straps around
the inside edge of the Frame Pad (6).
Tie these straps by hand around the nearest
2 pcs V-Rings.
)UDPHSDG
