//
//
1.
2.
4.
3.
MT6100BTA
MT6100BTAL
1. Active BT tubbie stand
2. Passive BT tubbie stand with 6 ft. cable
3. Passive BT tubbie
4. Amplified BT tubbie
5. 6 ft. power extention cable
Unlatch nut (7) and clamp (8)
locking tabs. Then unscrew
wingnut (9).
Line amplified tubbie (4) up
with the PCB mount on the top
of the tubbie stand (1). Then push
down firmly until clamp snaps in place.
Clamp locking tab (8)
*
MUST*
be latched before tightening
wingnut (9)
Tighten clamp wingnut (9).
Then close nut locking tab (7).
Then repeat steps to mount
passive tubbie (3) to passive
stand (2)
8.
7.
9.
8.
7.
9.
5.
Installation Instructions
Optional power adapter
for 110v AC to 12v DC
*Not Included*
