Attach the Push Pole and check that the Retaining Clip
and Cord are secure.
Lift the
fi
rst Portal with everyone starting at the middle.
As the Portal is raised the crew should move outwards in
the direction of the arrows.
Hold the Portal securely in the not quite vertical position.
Secure both Portal Brace Stays to the adjacent Base Plates.
Engage the Ridge Purlin hook end
fi
rst.
Raise the second Portal and rest on the Push Pole.
Use the Purlin Fork to engage the Ridge Purlin into the
second Portal.
Engage the roof and wall Brace Cables underneath the
Purlins.
IMPORTANT: All Brace Cables must be properly
fi
tted
into a single bay as shown.
Lightly tighten all the Brace Cables.
RAISE PORTALS
FIT BACE CABLES
11
12
13
14
15
16
17
18
19
20
